Linfox

Contents

Everybody knows that lowered tires won’t give you an opportunity to go far away. So that is very important to control the tire pressure and be able to adjust it. Low tire pressure increases fuel consumption. Also, because of low pressure the friction road is increased. Tire pressure monitoring system, or TPMS, – is a feature of many modern cars. It allows to control tire pressure, sitting at your comfort driver’s seat. When the air goes out of the tire, your pressure sensor gives warning and all you need is just to reset it. Today we will describe how to reset tire pressure sensor if your vehicle model is Chevy Silverado, Impala, Cruze or Tahoe.

Page 1 2016 Tahoe/Suburban Review this Quick Reference Guide for an overview of some important features in your Chevrolet Tahoe or Suburban. More detailed information can be found in your Owner Manual. Some optional equipment described in this guide may not be included in your www.chevrolet.com. Find the best used 2016 Chevrolet Colorado Z71 near you. Every used car for sale comes with a free CARFAX Report. We have 279 2016 Chevrolet Colorado Z71 vehicles for sale that are reported accident free, 214 1-Owner cars, and 326 personal use cars.

How to Reset Tire Pressure Sensor on Chevy Silverado

Reset the Tire Pressure Monitoring system on your Chevrolet Silverado:

1. Turn ON the ignition, with the engine OFF;
2. Apply the parking brake;
3. Using the DIC, press the vehicle information button until the RELEARN TIRE POSITIONS message displays. If your vehicle does not have the DIC buttons, press the trip odometer reset stem located on the instrument panel cluster until the RELEARN TIRE POSITIONS message displays. If your vehicle has the DIC buttons, press the set/reset button. The horn will sound twice to indicate the TPMS receiver is ready, and the TIRE LEARNING ACTIVE message will display. If your vehicle does not have the DIC buttons, press and hold the trip odometer reset stem until the horn chirps twice and the TIRE LEARNING ACTIVE message is displayed;
4. Alternate method: Simultaneously press the keyless entry transmitters lock and unlock buttons until you hear a sound signal or use the Tech 2 to initiate the learn processThe sound signal you hear will be the indication the mode has been enabled;
5. Starting with the left front tire, hold the antenna of the J-46079 against the tire sidewall close to the wheel rim at the valve stem location then press and release the activate button and wait for a sound signal, or increase/decrease the tire pressure for 8-10 seconds then wait for the sound signal. It may take 8-10 seconds until you hear the sound, which means that the pressure increase/decrease time period has been reached;
6. After the horn chirp sounds, proceed as in step 5 for the next 3 sensors in the following order: (Right front, Right rear, Left rear);
7. After the LR sensor has been learned, turn OFF the ignition to exit the learn mode;
8. After the learn mode has been exited, adjust all tire pressures to the recommended PSI;
9. For proper vehicle operation and to ensure coverage under the provisions of the new vehicle warranty, the vehicle must be reprogrammed with the correct calibrations as soon as the accessory wheels are installed.

If your Chevy Impala is of 2000 – 2005, so:

Using Light Switch

1. Turn the ignition to “ACC” position or “ON” position (engine off).
2. Turn the light switch to Parking Lamps three times for five seconds.

Using Radio

1. Inflate the tires to the specific pressure.
2. Turn the ignition to “ON” position, with the engine “OFF”.
3. Press and hold “DISP” button.
4. When “SETTINGS” is displayed, press “SEEK” button and scroll it up until “RESET” is appeared.
5. Press “PREV” or “NEXT”.
6. When “RESET” is appeared, press “DISP” button and wait for “DONE”.
7. Scroll and find “EXIT”, press “DISP” button.

1. The first step is to turn the ignition to “ACC” position or “ON” position.
2. Press and hold unlock and lock buttons until you hear the sound and see LF turn signal lighted. Alternatively, you can press “INFO” until “TIRE LEARN” notice appears. Press and hold “SET/RESET” and wait for the sound signal and left turn signal blink.

3. Starting with LF tire, increase/decrease the pressure until you hear the sound.
4. After this proceed with the relearn of the other 3 sensors in such order: RF, RR, LR. When you complete the relearn, you will hear the sound signal.
5. Turn the ignition to “OFF”.

Using standard ignition:

1. Park in the safe place.
2. Turn the ignition to “ON/RUN” position, with the engine “OFF”.
3. Press the “MENU” button.
4. Select the “VEHICLE INFORMATION” in the “DIC”.
5. Then scroll up the thumbwheel and find the Tire Pressure menu item display.
6. Press the “SET/CLR” button for requesting text display.
7. Press this button again.
8. Starting with LF tire, increase/decrease the pressure until you hear the sound. Also, you can use TPMS relearn tool and turn sensors on.
9. After this next 3 sensors should be in such order: RF, RR, LR. Horn will sound twice.
10. Turn the ignition to “OFF”.

If you are an owner of 2007-2016 Chevy Tahoe, so you should:

1. Stop your vehicle in a safe place and apply parking brake.
2. Turn the ignition key to “ON” position.
3. Press and hold unlock and lock buttons on RKE transmitter until you hear the sound signal.
4. If your vehicle doesn’t have RKE transmitter:

1) press the DIC “MENU” button on the turn signal lever.

2) using the thumbwheel select “TIRE PRESSURE MENU”.

3) press the “SET/CLR” button and wait for a requesting message.

4) press “SET/CLR” once more.

2016 Chevy Tahoe Modifications

5) horn will sound twice.

5. Place the relearn tool against the tire side wall for starting working at driver’s front tire. Press the button for turning the TPMS sensor on.
6. Do the same for the right-front tire and for the back tires.
7. Wait for the confirmatory sound signal, which will mean that the procedure is complete.
8. Turn the ignition “OFF”.

More about Tire Pressure Sensor

2016 Chevy Tahoe Z71